PRODUCCIÓN DE NANOARCILLA
DOI:
https://doi.org/10.56238/arev7n8-176Palabras clave:
Arcilla, Polímero, Grano, Minerales ArcillososResumen
Desde tiempos remotos, la humanidad ha utilizado la arcilla como materia prima esencial en los sectores comercial e industrial. Los nanocompuestos, como la nanoarcilla, presentan una mejora significativa en sus propiedades mecánicas y se utilizan en la industria en diversas aplicaciones. En este artículo, se recolectó la arcilla cruda, se realizó una suspensión coloidal y se obtuvo la nanoarcilla. El objetivo es producir un nanocompuesto a partir de la arcilla cruda recolectada del suelo, presentando sus características, composición química y análisis estructural. La metodología empleada para la producción de nanoarcilla se basó en la suspensión coloidal y el análisis físico de la arcilla cruda. La nanoarcilla producida se analizó mediante microscopía electrónica de barrido (MEB), espectroscopia de dispersión de energía de rayos X (EDS) y difracción de rayos X (DRX). Con base en los resultados obtenidos, se obtuvieron resultados satisfactorios en la producción de nanoarcilla en este estudio, ya que su fácil preparación y bajo costo permiten preparar un nanocompuesto para diversas aplicaciones.
Descargas
Referencias
CARASTAN, D. J. Obtaining and rheological characterization of styrenic polymer nanocomposites. Thesis (Doctorate) – Polytechnic School of the University of São Paulo, São Paulo, 2007.
CORDEIRO, E. M. S. et al. Extraction and characterization of nanocellulose from banana pseudostem fibers. In: North-Northeast Congress of Research and Innovation, 5, 2014. Maceió . Annals... p. 1-8.
DER – NATIONAL DEPARTMENT OF ROADS AND ROADWAYS. Soils – particle size analysis by screening, Road standard, Test method. DNER-ME 080/94.
DER – NATIONAL DEPARTMENT OF ROADS AND ROADWAYS. Soils – determination of the actual density, Road standard, Test method. DNER-ME 093/94.
DER – NATIONAL DEPARTMENT OF ROADS AND ROADWAYS. Soils – determination of the liquidity limit – reference method and expedited method, Road standard, Test method. DNER-ME 122/94.
DER – NATIONAL DEPARTMENT OF ROADS AND ROADWAYS. Soils – determination of the plasticity limit, Road standard, Test method. DNER-ME 082/94.
DER – NATIONAL DEPARTMENT OF ROADS AND ROADWAYS. Soils – sample preparation for characterization tests, Road standard, Test method. DNER-ME 041/94.
FERREIRA JUNIOR, Carlos Roberto. Synthesis and characterization of nanocomposites consisting of nanoclay and hydrogel for agricultural use. 2015. 80 f. Dissertation (master's degree). São Paulo State University. Faculty of Engineering of Ilha Solteira. Ilha Solteira, 2015.
LIMA JUNIOR, Anilson Mateus. Modification of nanoclay to obtain magnetic properties for possible use in remediation of water contaminated by methylene blue dye. 2024. 63 f. Dissertation (master's degree). São Paulo State University. Faculty of Engineering of Ilha Solteira. Ilha Solteira, 2024.
MORAES, Jaqueline Oliveira de et al. Properties of starch films incorporated from nanoclays and cellulose fibers. 2009.
MORAIS, MARCELO VICTOR DE ASSIS. Influence of the addition of carbon nanotubes on the physical behavior of a lateritic soil in the region of Rio Branco – ac. 71 p. 2021. Dissertation (master's degree), Federal University of Acre, Graduate Program in Science, Innovation and Technology for the Amazon – CITA.
MORENO, Maria Margarita Torres. Clays: Mineralogical composition, particle size distribution and pulp consistency. 125 p.. RIO CLARO – SP, 2012. São Paulo State University "Julio de Mesquita Filho" Institute of Geosciences and Exact Sciences.
REIS, Matheus Fernandes de Carvalho. Effect of the addition of organophilized nanoclays on the properties and strength of the urea-formaldehyde adhesive glue line. 2018. 65 f. Dissertation (Master's Degree in Forest Science) - Federal University of Viçosa, Viçosa. 2018.
